TensorGrip uses technology to create an adhesive system. A system with the sole intent of boosting your productivity and profitability – but not at the cost of quality.
It does this by being ultra efficient. It streamlines your process; reducing the effort and resource you have to put in, while growing your results.
It rewards you with Time, Money & Health.
Time
The most valuable resource you have. What you do with your time determines how successful you will be.
So if you have a tool (or adhesive)that makes the best possible use of your time, you can get more done.
This is exactly what TensorGrip does.
1. No Set Up.
Because TensorGrip is a self-contained adhesive system, it works by itself.
From the time your canister is opened, gun and hose attached, you never have to worry about set up again.
Consider this: set up with standard contact can take 15 minutes a day.
2. Rapid Tack
TensorGrip adhesives are engineered to have high and fast tack.
This means the adhesives have a high rubber content (the actual glue,) and low solvent content (keeps the glue liquid).
The solvent evaporates rapidly, and the bond can quickly be set in place. All TensorGrip adhesives tack off within 5 minutes, and most take less than 60 seconds.
Consider this: standard contact tack off can take 20mins to 2 hours.
3. Fast Application
The TensorGrip canister uses aerosol technology. Not air.
Where air breaks up the adhesive, so it floats toward a surface, aerosol technology projects it towards the surface forcefully.
The adhesive is propelled towards the surface, speeding up the application process.
Consider this: applying standard contact can take more than double the time of TensorGrip.
4. Clean Up
TensorGrip canisters are always left open. To pack up is to put the gun down.
Because TensorGrip uses aerosol technology, it’s accurate. The adhesive sprays exactly where you point the gun.
This makes clean up an easy task.
Consider this: clean up can mean scrubbing your entire workspace, and adhesive system.
Money
You want more of it.
There’s three ways to achieve this; borrow it, save it or raise prices.
TensorGrip gives you the sustainable option. Saving money in your processes so you can enjoy increased margins, and have one up on the competition.
1. Time is Money
All the points made about how TensorGrip saves time also save money.
By making your internal processes more efficient, it gives you the ability to speed up and get more done each day.
It reduces the amount of time it takes to manufacture your product; cutting your labour costs (the largest cost in manufacturing).
That slashes your cost per unit to manufacture, a massive industry advantage.
Consider this: you could be more than doubling your production each day with TensorGrip.
2. High Coverage Rate
One TensorGrip canister will cover three times the distance of adhesive drums – even though they are roughly the same size.
This is because TensorGrip liquid a has a high solids content of approximately 49%. There is more actual glue in a canister, so it goes further.
This radically reduces how much it costs to bond surfaces.
Consider this: most standard contacts have approximately 9-14% solids
3. No Waste
Every drop of glue in a TensorGrip canister is used.
Because it is an aerosol based system, every drop of adhesive is forced out.
But, it’s also self-contained, so no adhesive is exposed to air (and wasted) until it’s sprayed by you.
Consider this: approximately 20% of every contact adhesive drum is wasted.
4. Equipment
TensorGrip has three pieces; canister, gun and hose.
Once these have been purchased, there’s no ongoing costs.
$0 is spent up-keeping air compressors and extra labour hours.
Consider this: at least $5000 is wasted every year on equipment by standard contact.
Health
The risks of using glue are serious.
Many diseases and conditions can be born from adhesive exposure.
But TensorGrip minimises the risks so they’re almost non-existent.
1. Atomisation
When glue is sprayed, it’s projected into the atmosphere. Atomisation is how much it floats around.
Floating around is bad because it can enter your body and cause harm.
Because TensorGrip is projected towards the surface, it has the lowest atomisation rate of all spray adhesives.
Consider this: standard contact atomises badly. Read here to find out why.
2. Easy application
TensorGrip is very easy to apply. It’s portable, and manufactured to be user friendly.
This means it’s less stressful for your joints and general health.
Consider this: you’ll be able to bond surfaces for many years to come.
So What’s Your Choice?
Do you want an adhesive that’s going to hold back your business? Standard contact is your best bet.
Or, do you want an adhesive that could drive your business into the future? With TensorGrip, increased productivity and profitability are on your horizon. Time, money and health.
Choose wisely.
We would love to hear any questions or comments you have about TensorGrip. Our experts are only a phone call or email away. 02 6175 0574, sales@quin-global.com.au.
