Unlike many market alternatives, TensorGrip TC Adhesives are developed with the bigger picture in mind. 

We know the importance of the end result, understanding that the very reason Infusion & RTM processes are used in Composites Industries is to maximise structural integrity, optimise resin-to-fiber ratios and to reduce weight.

With these demands in mind, it is essential that the spray adhesive used in dry layup will perform its all-important role until the mould is under vacuum pressure, whilst not interfering with the resin flow during infusion. 

Resin Compatibility Redefined

Despite these challenges, most adhesives used in dry layup offer very poor resin compatibility. The consequences of poor resin compatibility include incomplete jobs as well as severe and expensive failures.

Here at TensorGrip TC Adhesives, we’re proud to provide Composites industries with products which have proven to Outperform in Infusion applications across the spectrum of most common resin types including polyester, vinyl ester, styrene ester and epoxy using all types of glass mat reinforcements & prestigious carbon fibre fabrics.

Get Started with TensorGrip TC Adhesives 

It’s true: we understand that the applications within Composites industries are many, varied and often project-specific. Fortunately, we’re on hand to provide help, support and expert guidance in regards to product selection. Regardless of the task at-hand, you can trust in TensorGrip: reach out to UK Category Manager Darren Hill via darren.hill@quinglobal.com or EEMEA & Russia Category Manager Mark Berry via mark.berry@quinglobal.com.