When you think of benefits what is the first thing that comes to mind? Is it that free coffee you get when you have collected enough points from Costas? Or is it on a hot summers day and the bartender feeling generous is giving away free beers? Whatever the cause an advantage or profit gained from when you are given a benefit from something always makes us feel good and with that feel-good factor comes happiness and contentment. This is what we care about at Quin Global UK and with the benefits our canister systems provide things just can’t get any better! In today’s blog we are talking about our canister systems and what benefits are in them for you. So grab that coffee or beer and join us as we look at ways to make you lives that bit easier.    

Did you know that our canister adhesive system is faster, cleaner and more efficient than traditional methods of applying adhesive?

A standard canister of adhesive liquid contains approximately 14-18% adhesive solids and 72-76% solvent. As we all know, if this solution is applied to a substrate directly it becomes messy, cumbersome and often bleeds through the substrate or runs over the edges. Alternatively using a pressurised gun with an attached air compressor allows you to spray an even coating of the adhesive onto your substrate. However, you then face the issue of having to constantly refill and clean the gun, plus you can’t take it on location as you can’t transport the large air compressor needed to operate the gun. On top of all of this, no matter which option you choose, dry time can take up to several days before your product is ready for its next stage.

If that sounds cumbersome to you, you are not alone!  An immense amount of money, time and research has been dedicated to improving this process. The results?  A canister based adhesive that is faster, more efficient, cleaner, portable and dries faster than ever before, who wouldn’t want that?

So how is achieved? By totally enclosing the adhesive in a pressurised, airtight containment vessel, we can significantly reduce the amount of solvent required to be mix into the adhesive, this in turn means that we can pack over two and a half times the amount of adhesive into one of our small 22 litre canisters as you would get from a standard 20 litre drum of liquid adhesive.

Inside the canister we also pack all the gas propellant that you will need for that specific amount of adhesive which means that you are no longer reliant on an air compressor and suddenly you can take your adhesive almost anywhere with you. Attach to that an airtight hose and a gun that regulates the amount of adhesive that is applied to your substrate and you are left with a system that is cleaner, faster, and smarter. A system that enables you to apply your adhesive more efficiently to ensure no leakage, dripping or wastage and a system that enables you to use every single drop of adhesive contained within the canister.

In the end, all these benefits add up to give you the best bond in the most efficient way and that means you save time, money and wastage.

Here is our top 10 benefits for using our adhesive system

Recyclable canister

• Time saving
• The professional spray gun allows for greater adjustability of the spray pattern.
• Portable system
• Quicker to apply compared to aerosols
• More cost effective on a large scale
• Kick-off Kit box with the first purchase
• Reliable and fit for purposes
• Great support from the manufacturer or your local distributor in your local language

So there you have it, not only do we have some great benefits that are sure to make your lives easier, we also work with you to ensure you get the right support when you need it. So grab your free coffee or beer and enjoy life being that bit more relaxed!

Interested in our products have a look at our list of products here.